CVA MQI-C • Electric heater battery

Circular electrical heating battery with built-in pulser for proportional control, the setpoint of the temperature is set by means of a potentiometer on the battery, maximal outlet temperature of 50°C. The minimal air velocity of 1,5 m/s trough the battery is required. Available in diameter 125 up to 400 mm and in power range from 300 up to 3000 W (others available on request). Operating voltage 230 or 400 V AC.

• Pre-heater
• Constant supply air temperature

• Casing made of aluzinc coated steel, with rubber rings on either side for air tightness
• Heating elements made of stainless steel ASI 304

• Two-stage overheat protection: the first stage switches on when the temperature reaches 50°C (resets automatically), the second stage switches on when the temperature reaches 100°C (is reset manually with pushbutton on the casing).
• Setpoint temperature range : 0° to 30°C.

• Duct temperature sensors, type TJ-K10K

• Circulair ducts

CVA MQI-C 200

Explanation

CVA MQI-C = Electrical heater with built-in control and setpoint

200 = Diameter in mm, (see table)