Control your indoor climate from any location via smartphone or tablet
Decreases power consumption so that other appliances that need large power consumption can be used. This function is also energy saving.
Current consumption is reduced by about 80% when operating on standby.
Saves energy, by preventing overcooling or overheating during night time.
The unit can be used as fan, blowing air without heating or cooling.
When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
Can be selected for rapid heating or cooling; after the powerful mode is turned off, the unit returns to the preset mode.
Automatically selects heating or cooling mode to achieve the set temperature.
"Silent" button on the remote control lowers the operation sound of the indoor unit by 3dB(A)
"Silent" button on the remote control lowers the operation sound of the outdoor unit by 3dB(A) to ensure a quiet environment for the neighbourhood.
Reduces automatically the operation sound during nighttime of the outdoor unit by 3dB(A) by removing an outdoor unit jumper wire. (Multi outdoor units in cooling mode only).
Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Automatically selects the necessary fan speed to reach or maintain the set temperature.
Allows to select up to the given number of fan speed.
Allows humidity levels to be reduced without variations in room temperature.
Using electrons to trigger chemical reactions with air borne particles, the Flash Streamer breaks down allergens such as pollen and fungal allergens and removes bothersome odours providing a better, cleaner air
Decomposes bothersome odours of for example tobacco and pets
Removes airborne dust particles to ensure a steady supply of clean air.
Can be set to start heating or cooling anytime on a daily or weekly basis.
Can be set to start operation anytime during a 24 hour period
Starts, stops and regulates the air conditioner from a distance.
Starts, stops and regulates the air conditioner.
Starts, stops and regulates several air conditioners from one central point.
The unit restarts automatically at the original settings after power failure.
Simplifies maintenance by indicating system faults or operating anomalies.
Up to 3 indoor units can be connected to a single outdoor unit, even if they have different capacities. All indoor units can individually be operated within the same heating or cooling mode.
Practically inaudible: the unit runs so quietly, you will almost forget it is there.
Quickly heats up your home when starting up your air conditioner. Set temperature is reached 20% faster than a regular air conditioner (pair only)
Optimises convection by distributing hot air from the bottom of the unit
Provides 30 minutes cosy heating by simulating radiant heat