PRODUCTS
EShop-number
Password
Welcome to SK Sales
FSD-C • Circular Combination Fire & Smoke and VC Damper
- Combination Fire, Smoke and Volume Control Damper
- Can be installed from one side of the fire separation
- ES classified fire dampers
- Damper with reduced smoke leakage
- BS EN 1366-2 / 13501-3
FSD-C Series
Circular Single Blade Externally Resettable Combination Fire, Smoke and Volume Control Damper
Circular Single Blade Externally Resettable Combination Fire, Smoke and Volume Control Damper
Characteristics
- ES classified fire dampers with reduced smoke leakage characteristics to BS EN 1366-2 (test standard) and BS EN 13501-3 (extended field of application)
- Aerodynamically Air Control tested to BS EN 1751
- Tested and assessed installation methods in differing support constructions BS EN 1366-2
- Integrated volume control capability
- Can be installed from one side of the fire separation without the need to fit a secondary installation plate or provide fire-rated infill material
- Replaceable thermal fuse element from outside of the duct.
- Commissioning friendly
- Blade Position Indicator
- IP54 degree of protection
- Momentary toggle test switch for periodic damper testing
- LED green indication when lit indicates that a supply voltage is present and that the temperature fuses are operational
- Damper casings conform to BS EN 1506
Order example
FSD-C G IP D200 CL PMC24-TF
Type:
- FSD-C - Externally Resettable Circular Single Blade Combination Fire/Smoke and Volume Control Damper
Blade Material:
- G - Galvanised Mild Steel
- S - 430 Grade Stainless Steel
Installation Plate:
- IP - Installation Plate
- Duct Diameter:
- D100 - 100mm Diameter
Accessories:
- CL Cleats
Application / Motor Type:
- FSD-C-FS Fire/Smoke Damper
- PMC24-TF 24 volt Spring Return Actuator with Thermal Fuse
- PMC230-TF 230 volt Spring Return Actuator with Thermal Fuse
- PMC24-NTF 24 volt Spring Return Actuator no Thermal Fuse
- PMC230-NTF 230 volt Spring Return Actuator no Thermal Fuse
- FSD-C-SC Control Damper
- BLE24 Drive Open/Drive Closed Operation
- BLE230 Drive Open/Drive Closed Operation
- FSD-C-VC Volume Control Damper
- LM24A Open/Close Operation
- LM24A-SR Modulating via 0 to 10V Operation
- LF24A Spring Return Operation
- FSD-C-ESC Extended Spindle
- Spindle Actuator by others will require a clamp suitable for a 8mm dia., 55mm long drive spindle operation
Requesting information. Please wait a moment...
